Kubeflow Orchestrator

Orchestrating your pipelines to run on Kubeflow.

The Kubeflow orchestrator is an orchestrator flavor provided by the ZenML kubeflow integration that uses Kubeflow Pipelines to run your pipelines.

This component is only meant to be used within the context of a remote ZenML deployment scenario. Usage with a local ZenML deployment may lead to unexpected behavior!

When to use it

You should use the Kubeflow orchestrator if:

  • you're looking for a proven production-grade orchestrator.

  • you're looking for a UI in which you can track your pipeline runs.

  • you're already using Kubernetes or are not afraid of setting up and maintaining a Kubernetes cluster.

  • you're willing to deploy and maintain Kubeflow Pipelines on your cluster.

How to deploy it

To run ZenML pipelines on Kubeflow, you'll need to set up a Kubernetes cluster and deploy Kubeflow Pipelines on it. This can be done in a variety of ways, depending on whether you want to use a cloud provider or your own infrastructure:

  • Have an existing AWS EKS cluster set up.

  • Make sure you have the AWS CLI set up.

  • Download and install kubectl and configure it to talk to your EKS cluster using the following command:

    aws eks --region REGION update-kubeconfig --name CLUSTER_NAME
  • Install Kubeflow Pipelines onto your cluster.

  • ( optional) set up an AWS Service Connector to grant ZenML Stack Components easy and secure access to the remote EKS cluster.

If one or more of the deployments are not in the Running state, try increasing the number of nodes in your cluster.

If you're installing Kubeflow Pipelines manually, make sure the Kubernetes service is called exactly ml-pipeline. This is a requirement for ZenML to connect to your Kubeflow Pipelines deployment.

How to use it

To use the Kubeflow orchestrator, we need:

  • A Kubernetes cluster with Kubeflow pipelines installed. See the deployment section for more information.

  • A ZenML server deployed remotely where it can be accessed from the Kubernetes cluster. See the deployment guide for more information.

  • The ZenML kubeflow integration installed. If you haven't done so, run

    zenml integration install kubeflow
  • Docker installed and running (unless you are using a remote Image Builder in your ZenML stack).

  • kubectl installed (optional, see below)

If you are using a single-tenant Kubeflow installed in a Kubernetes cluster managed by a cloud provider like AWS, GCP or Azure, it is recommended that you set up a Service Connector and use it to connect ZenML Stack Components to the remote Kubernetes cluster. This guarantees that your Stack is fully portable on other environments and your pipelines are fully reproducible.

  • The name of your Kubernetes context which points to your remote cluster. Run kubectl config get-contexts to see a list of available contexts. NOTE: this is no longer required if you are using a Service Connector to connect your Kubeflow Orchestrator Stack Component to the remote Kubernetes cluster.

  • A remote artifact store as part of your stack.

  • A remote container registry as part of your stack.

We can then register the orchestrator and use it in our active stack. This can be done in two ways:

  1. If you have a Service Connector configured to access the remote Kubernetes cluster, you no longer need to set the kubernetes_context attribute to a local kubectl context. In fact, you don't need the local Kubernetes CLI at all. You can connect the stack component to the Service Connector instead:

    # List all available Kubernetes clusters that can be accessed by service connectors
    zenml service-connector list-resources --resource-type kubernetes-cluster -e
    # Register the Kubeflow orchestrator and connect it to the remote Kubernetes cluster 
    zenml orchestrator register <ORCHESTRATOR_NAME> --flavor kubeflow --connector <SERVICE_CONNECTOR_NAME> --resource-id <KUBERNETES_CLUSTER_NAME>
    # Register a new stack with the orchestrator
    zenml stack register <STACK_NAME> -o <ORCHESTRATOR_NAME> -a <ARTIFACT_STORE_NAME> -c <CONTAINER_REGISTRY_NAME> ... # Add other stack components as needed

    The following example demonstrates how to register the orchestrator and connect it to a remote Kubernetes cluster using a Service Connector:

    $ zenml service-connector list-resources --resource-type kubernetes-cluster -e
    The following 'kubernetes-cluster' resources can be accessed by service connectors that you have configured:
    ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━━━━━┓
    ┃             CONNECTOR ID             │ CONNECTOR NAME        │ CONNECTOR TYPE │ RESOURCE TYPE         │ RESOURCE NAMES      ┃
    ┠──────────────────────────────────────┼───────────────────────┼────────────────┼───────────────────────┼─────────────────────┨
    ┃ e33c9fac-5daa-48b2-87bb-0187d3782cde │ aws-iam-multi-eu      │ 🔶 aws         │ 🌀 kubernetes-cluster │ kubeflowmultitenant ┃
    ┃                                      │                       │                │                       │ zenbox              ┃
    ┠──────────────────────────────────────┼───────────────────────┼────────────────┼───────────────────────┼─────────────────────┨
    ┃ ed528d5a-d6cb-4fc4-bc52-c3d2d01643e5 │ aws-iam-multi-us      │ 🔶 aws         │ 🌀 kubernetes-cluster │ zenhacks-cluster    ┃
    ┠──────────────────────────────────────┼───────────────────────┼────────────────┼───────────────────────┼─────────────────────┨
    ┃ 1c54b32a-4889-4417-abbd-42d3ace3d03a │ gcp-sa-multi          │ 🔵 gcp         │ 🌀 kubernetes-cluster │ zenml-test-cluster  ┃
    ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━━━━━┛
    
    $ zenml orchestrator register aws-kubeflow --flavor kubeflow --connector aws-iam-multi-eu --resource-id zenhacks-cluster
    Successfully registered orchestrator `aws-kubeflow`.
    Successfully connected orchestrator `aws-kubeflow` to the following resources:
    ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━━┓
                 CONNECTOR ID              CONNECTOR NAME    CONNECTOR TYPE  RESOURCE TYPE          RESOURCE NAMES   
    ┠──────────────────────────────────────┼──────────────────┼────────────────┼───────────────────────┼──────────────────┨
     ed528d5a-d6cb-4fc4-bc52-c3d2d01643e5  aws-iam-multi-us  🔶 aws          🌀 kubernetes-cluster  zenhacks-cluster 
    ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━━┛
    
    # Create a new stack with the orchestrator
    $ zenml stack register --set aws-kubeflow -o aws-kubeflow -a aws-s3 -c aws-ecr
    Stack 'aws-kubeflow' successfully registered!
            Stack Configuration           
    ┏━━━━━━━━━━━━━━━━━━━━┯━━━━━━━━━━━━━━━━━┓
     COMPONENT_TYPE      COMPONENT_NAME  
    ┠────────────────────┼─────────────────┨
     ARTIFACT_STORE      aws-s3          
    ┠────────────────────┼─────────────────┨
     ORCHESTRATOR        aws-kubeflow    
    ┠────────────────────┼─────────────────┨
     CONTAINER_REGISTRY  aws-ecr         
    ┗━━━━━━━━━━━━━━━━━━━━┷━━━━━━━━━━━━━━━━━┛
            'aws-kubeflow' stack         
    No labels are set for this stack.
    Stack 'aws-kubeflow' with id 'dab28f94-36ab-467a-863e-8718bbc1f060' is owned by user user.
    Active global stack set to:'aws-kubeflow'
  2. if you don't have a Service Connector on hand and you don't want to register one, the local Kubernetes kubectl client needs to be configured with a configuration context pointing to the remote cluster. The kubernetes_context must also be configured with the value of that context:

    zenml orchestrator register <ORCHESTRATOR_NAME> \
        --flavor=kubeflow \
        --kubernetes_context=<KUBERNETES_CONTEXT>
    
    # Register a new stack with the orchestrator
    zenml stack register <STACK_NAME> -o <ORCHESTRATOR_NAME> -a <ARTIFACT_STORE_NAME> -c <CONTAINER_REGISTRY_NAME> ... # Add other stack components as needed

ZenML will build a Docker image called <CONTAINER_REGISTRY_URI>/zenml:<PIPELINE_NAME> which includes all required software dependencies and use it to run your pipeline steps in Kubeflow. Check out this page if you want to learn more about how ZenML builds these images and how you can customize them.

You can now run any ZenML pipeline using the Kubeflow orchestrator:

python file_that_runs_a_zenml_pipeline.py

Kubeflow UI

Kubeflow comes with its own UI that you can use to find further details about your pipeline runs, such as the logs of your steps. For any runs executed on Kubeflow, you can get the URL to the Kubeflow UI in Python using the following code snippet:

from zenml.client import Client

pipeline_run = Client().get_pipeline_run("<PIPELINE_RUN_NAME>")
orchestrator_url = pipeline_run.run_metadata["orchestrator_url"].value

Additional configuration

For additional configuration of the Kubeflow orchestrator, you can pass KubeflowOrchestratorSettings which allows you to configure (among others) the following attributes:

  • client_args: Arguments to pass when initializing the KFP client.

  • user_namespace: The user namespace to use when creating experiments and runs.

  • pod_settings: Node selectors, affinity, and tolerations to apply to the Kubernetes Pods running your pipeline. These can be either specified using the Kubernetes model objects or as dictionaries.

from zenml.integrations.kubeflow.flavors.kubeflow_orchestrator_flavor import KubeflowOrchestratorSettings
from kubernetes.client.models import V1Toleration

kubeflow_settings = KubeflowOrchestratorSettings(
    client_args={},
    user_namespace="my_namespace",
    pod_settings={
        "affinity": {
            "nodeAffinity": {
                "requiredDuringSchedulingIgnoredDuringExecution": {
                    "nodeSelectorTerms": [
                        {
                            "matchExpressions": [
                                {
                                    "key": "node.kubernetes.io/name",
                                    "operator": "In",
                                    "values": ["my_powerful_node_group"],
                                }
                            ]
                        }
                    ]
                }
            }
        },
        "tolerations": [
            V1Toleration(
                key="node.kubernetes.io/name",
                operator="Equal",
                value="",
                effect="NoSchedule"
            )
        ]
    }
)


@pipeline(
    settings={
        "orchestrator": kubeflow_settings
    }
)


...

Check out the SDK docs for a full list of available attributes and this docs page for more information on how to specify settings.

Enabling CUDA for GPU-backed hardware

Note that if you wish to use this orchestrator to run steps on a GPU, you will need to follow the instructions on this page to ensure that it works. It requires adding some extra settings customization and is essential to enable CUDA for the GPU to give its full acceleration.

Important Note for Multi-Tenancy Deployments

Kubeflow has a notion of multi-tenancy built into its deployment. Kubeflow's multi-user isolation simplifies user operations because each user only views and edited the Kubeflow components and model artifacts defined in their configuration.

Using the ZenML Kubeflow orchestrator on a multi-tenant deployment without any settings will result in the following error:

HTTP response body: {"error":"Invalid input error: Invalid resource references for experiment. ListExperiment requires filtering by namespace.","code":3,"message":"Invalid input error: Invalid resource references for experiment. ListExperiment requires filtering by 
namespace.","details":[{"@type":"type.googleapis.com/api.Error","error_message":"Invalid resource references for experiment. ListExperiment requires filtering by namespace.","error_details":"Invalid input error: Invalid resource references for experiment. ListExperiment requires filtering by namespace."}]}

In order to get it to work, we need to leverage the KubeflowOrchestratorSettings referenced above. By setting the namespace option, and by passing in the right authentication credentials to the Kubeflow Pipelines Client, we can make it work.

First, when registering your Kubeflow orchestrator, please make sure to include the kubeflow_hostname parameter. The kubeflow_hostname must end with the /pipeline post-fix.

zenml orchestrator register <NAME> \
    --flavor=kubeflow \
    --kubeflow_hostname=<KUBEFLOW_HOSTNAME> # e.g. https://mykubeflow.example.com/pipeline

Then, ensure that you use the pass the right settings before triggering a pipeline run. The following snippet will prove useful:

import requests

from zenml.client import Client
from zenml.integrations.kubeflow.flavors.kubeflow_orchestrator_flavor import (
    KubeflowOrchestratorSettings,
)

NAMESPACE = "namespace_name"  # This is the user namespace for the profile you want to use
USERNAME = "admin"  # This is the username for the profile you want to use
PASSWORD = "abc123"  # This is the password for the profile you want to use

# Use client_username and client_password and ZenML will automatically fetch a session cookie
kubeflow_settings = KubeflowOrchestratorSettings(
    client_username=USERNAME,
    client_password=PASSWORD,
    user_namespace=NAMESPACE
)


# You can also pass the cookie in `client_args` directly
# kubeflow_settings = KubeflowOrchestratorSettings(
#     client_args={"cookies": session_cookie}, user_namespace=NAMESPACE
# )

@pipeline(
    settings={
        "orchestrator": kubeflow_settings
    }
)

:
...

if "__name__" == "__main__":
# Run the pipeline

Note that the above is also currently not tested on all Kubeflow versions, so there might be further bugs with older Kubeflow versions. In this case, please reach out to us on Slack.

Using secrets in settings

The above example encoded the username and password in plain text as settings. You can also set them as secrets.

zenml secret create kubeflow_secret \
    --username=admin \
    --password=abc123

And then you can use them in code:

# Use client_username and client_password and ZenML will automatically fetch a session cookie
kubeflow_settings = KubeflowOrchestratorSettings(
    client_username="{{kubeflow_secret.username}}",  # secret reference
    client_password="{{kubeflow_secret.password}}",  # secret reference
    user_namespace="namespace_name"
)

See full documentation of using ZenML secrets here.

For more information and a full list of configurable attributes of the Kubeflow orchestrator, check out the SDK Docs .

ZenML Scarf

Last updated